High Precision Incline Angle Tilt Meter For Dam Deformation
Inclination Monitor Sensor
▶ INTRODUCTION
PCA826T-CAN2.0A is a high-performance product developed by Rion
Technology specially for the high-precision inclination
measurement. Before leaving the factory, all products would have
full temperature range calibration and compensation, and a two-week
long-term stability test ensures compatibility under different
working conditions and maintains the best performance indicators
during the long-term test cycle. Built-in filtering algorithm makes
the product have lower noise and higher response speed. It is
CAN2.0A output. The characteristics of non-contact installation
make PCA826T easy and convenient to install. You only need to mount
the sensor on the surface of the object to be measured with screws,
and the horizontal angle of the object can be automatically
calculated, which is simple to use. Strong resistance to external
electromagnetic interference, strong shock and vibration ability,
widely used in satellite communication vehicles, radar antenna
vehicles, wind turbines etc.
▶ MAIN FEATURES
★ Biaxial tilt angle measurement
★ Range ±1～±60° optional
★ Horizontal/vertical optional
★ DC 9～36V wide voltage input
★ Wide temperature operation -40～+85℃
★ Resolution 0.0005°
★ IP67 protection grade
★ Size: L82×W70×H42mm
★ Output mode CAN2.0A
▶ APPLICATION
★ Wind power monitoring
★ Bridge and Dam monitoring
★ Ancient building monitoring
★ High-speed rail track monitoring
★ Ground satellite communication vehicles
★ Railway gauge ruler and gauge leveling
★ Satellite communication vehicle
★ Geological equipment tilt monitoring
★ Engineering vehicle leveling
▶ INSTALLATION PRECAUTION
Please install the tilt sensor according to the correct method.
Incorrect installation will cause measurement errors. Pay special
attention to one "surface" and two "line":
1) The sensor mounting surface and the surface to be measured must
be fixed tightly, flat and stable, if installation surface is
unevenness, it will cause the angle error.
2) The axis of the sensor and the axis to be measured must be
parallel, and there should be no angle between the two axes as
possible.
Specification
| PCA826T | CONDITION | PARAMETERS | UNIT |
| Measure range | | ±5 | ±10 | ±30 | ±60 | ° |
| Measure axis | | XY | XY | XY | XY | |
| Resolution | | 0.0005 | 0.0005 | 0.0005 | 0.0005 | ° |
| Measure accuracy | @25℃ | 0.001 | 0.002 | 0.003 | 0.005 | ° |
| Long-term stability | | 0.02 | 0.02 | 0.03 | 0.04 | ° |
| Zero temp coefficient | -40～85℃ | 0.0002 | 0.0002 | 0.0002 | 0.0002 | °/℃ |
| Sensitivity temp coefficient | -40～85℃ | ≤50 | ≤50 | ≤50 | ≤50 | ppm/℃ |
| Power on time | | <0.4 | <0.4 | <0.4 | <0.4 | S |
| Response frequency | | 0.04 | 0.04 | 0.04 | 0.04 | S |
| Output rate | 5Hz,10Hz,25Hz,35Hz,50Hz,100Hz. Can be set |
| Ouput signal | RS485/RS422 optional |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥50000 hour/time |
| Insulation Resistance | ≥100 MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard configuration 1 meter, wear-resistant, wide temperature,
shielded cable, mm aviation connector |
| Weight | 385g (exclude cable) |
RION Technology Co., Ltd. is located in a fantastic city -
Shenzhen. Our company is a high technology company that integrates
research, development, production and sale, and is mainly engaged
in the sale of inclinometer sensors, digital compasses, gyro
sensor, acceleration sensors and so on. These products are widely
used in many industrial control fields, such as automobiles, ships,
airplanes, railways, medical facilities, dam safety monitoring, oil
drilling, coal mining and ocean surveying. Our company has
established good business relationships with many international
famous companies.
